How To Setup RAID 0 Windows 10 - A Complete Guide

Setting up a raid on Microsoft windows would possibly require changing settings in BIOS. Below are the things to consider on How to setup RAID 0 windows 10.
RAID, an acronym for “Redundant Array of Independent Disks,implies setting up multiple drives in a single array for the purpose of redundancy and efficiency in providing an extra cushion for protecting valuable data. Below, we walk you through the steps of how to set up RAID 0 for Windows 10.

RAID 0 refers to disk striping. The striping process involves dividing or spreading the data into various storage spaces, enabling read/write functions quickly, for example on SSDs (solid-state drive) or hard disk drives.

A parity data is calculated by applying binary (XOR) functions that are stored in the array of RAID disks. For example, the use of 0 for even parity and the use of 1 for odd parity.

Basics before configuring


Basics Before Configuring | Ttr Data Recovery

Setting up a raid on Microsoft windows would possibly require changing settings in BIOS.

Raid 0 disk can be installed on Windows 10 even if the operating system is already installed, provided the system has a RAID I/O controller hub (ICH). It also requires enabling the raid controller in windows.

If the SATA hard drive is the boot drive, enabling the RAID controller is not suggested.

If the controller is still enabled, it could instantly lead to a blue screen with an error code and lead to a reboot.

If one still prefers to enable RAID, it is recommended to reinstall the Windows 10 operating system.

  • The first step
    Is to create a backup of the valuable information so that it isn’t erased in the process. With the files backed up, the process of setting up this configuration will have zero repercussions on sensitive files.
  • Make sure that
    The drives that are being unified or integrated into Windows are the same size, the same brand, and the same read/write speed. One also needs to check whether the motherboard of the windows operating system supports the hard drives.
  • After installing
    The disks into the system, allow the drive to boot into Windows 10.
  • Search for storage space
    And click “create a new pool and storage space”. Select the “disk management” option to start configuring the drive to Windows.
  • All the drives in Windows
    That can be used for a storage pool are visible on the screen. Select a new striped volume.
  • From among the drives
    Visible on the screen select two or more drives that you wish to combine.
  • To confirm
    That you have chosen the correct files, click on the option “view files”
  • Create back up
    The remaining files if there are any other files left behind.
  • When the process is done,
    Click on “create storage space”
  • When the process is completed,
    You will see a disk along with a default drive letter of the right capacity in Windows explorer.
  • Click on the search box
    And type “manage storage spaces” and click it to ensure the smooth functioning of the array
  • Since Windows 10 doesn’t address
    The disks with its name, click on the disk and enter the disk name or select the drive letter you want.

Since the data is striped across the array of independent disks without parity data, all the files are lost if the hard drives fail. On the flip side, because of the same reason, multiple disks can access the files and documents.

In simpler terms, parity means checking whether any files are re-written on disks or lost in the course of transmitting the details into another computer.

Errors resurfacing during or after the configuration should be monitored well. Professional data recovery services help you select the best options for raid 0 data recovery.

TTR data recovery a reliable firm in streamlined and time-efficient processes to help you retrieve your files back to life.

Does setting up RAID format drives?

Does Setting Up Raid Format Drives | Ttr Data Recovery

It is impossible to set up a raid software without formatting it. If you are setting up the software/hardware without creating a backup, the loss of important content is inevitable.

Despite a long list of reasons for failures, a read failure could also erase all the relevant information, the controller could show the disks as unavailable in Windows and then it would finally require a person to build up the files again if a backup was already created or opt for data recovery services to retrieve it back.

It should be backed up at all times. Since, raid 0 does not provide redundancy, if one file fails the whole array is lost. It will wipe the drive clean. In conclusion, even if the files are ages old, one needs to create a backup from time to time.

The disk striping method without data redundancy can only be used for files or media that are not permanently stored or in cases when a backup of relevant documents or media are already present into another computer or other storage spaces.

How to set up RAID 0 on an existing system?

How To Set Up Raid 0 On An Existing System | Ttr Data Recovery

Needless to mention the importance of a backup. Back up the important files in external storage spaces before connecting a new disk that you want to set up in the raid controller. Follow the manual for more details about the raid controller on your computer.

The raid drives will be detected by the system as soon as they are connected. Reboot the system and restore the backed up data into the system after the drives are set up.

Setting up Raid disks on an existing system gives you benefits of additional space and faster and efficient performance.

How to set up raid 0 for enterprises?

How to set up raid 0 for enterprises | TTR Data Recovery

You can use raid 0 for your business regarding how you want to balance the requirements of your enterprise.

Industries that not only want a striped input/output (I/O) for those that consider speed as a prime factor as well, the use of this RAID 0 is preferred.

People usually select it for its better performance and a reliable storage system. For businesses that want technology that is easy to implement, this raid setup can prove to be an edge over the others. Businesses usually use this option for purposes like caching or editing video and retouching.

Whereas…

Lack of storage for redundant data in this type of RAID causes higher susceptibility to loss of information and the fault tolerance factor isn’t supported well.

For any organization, important files are considered priceless, and it could be a nightmare to lose crucial business information. Hence, its paramount function is to manage its files in better and efficient ways at the lowest expenses.

Though setting up raid 0 on windows is a breeze, one should make sure whether it suits their requirements.

Now, you have the knowledge on how to setup RAID 0 windows 10, feel free to connect with our RAID drive data recovery experts if you have some RAID problems.

Tommy Khamoushi - Data Recovery Expert for TTR Data Recovery

About the Author
Tommy Khamoushi, Data Recovery Expert

Tommy Khamoushi is an IACRB-certified Data Recovery Engineer and a Certified Forensic Computer Investigator. He has more than 20 years of experience in data recovery including providing technical support for the House of Representatives.

Tommy leads a team of data recovery engineers and experts at TTR Data Recovery to recover highly sensitive data for government agencies like the National Aeronautics and Space Administration (NASA) and enterprise businesses using advanced and proprietary techniques and processes.

Connect with Tommy on LinkedIn.