Hard Drive Short DST Check Failed [A Helpful Guide]

(888) 328-2887
Start Data Recovery

Hard drive short DST failed - What to do, what are codes 0146, 0142, and 0141 errors, and what are the symptoms. We will cover all in this user guide!

Table Of Content
HDD DST Failed [A Helpful Guide]

The hard drive short DST is one of the most important measures of the integrity of how a hard drive works. The two kinds of Disk Self Test are the long DST and short DST.

Both of these DST are drive procedures that gauge your PC’s health and performance. This is why it could pose a major detour in your work when a Drive start-up test failed appears in your system.

TTR Data Recovery is here for you in your time of long Disk Self Test or hard disk short DST failed error dilemmas. In this post, we talk more about the steps to fix hard disk drive short disk start-up test failed error.

Everything You Need To Know About Disk Sef-Test Failed

What does A Short Self-Test Check failed mean?

What Does Hard Drive Short Dst Check Failed Mean | Ttr Data Recovery

The Drive Self-Test (DST) is your computer’s built-in program that carries out trials on the physical integrity of the hard drive. Bigtime laptop manufacturers like Dell and HP laptop, are delivered with hard drive that are already equipped with DST’s that will run trials every time your computer reboot.

A hard disk short DST test and long Drive start-up test centers on your computer’s major segments, some of which include read/write platters, control boards, motors, and ROM. This test is liable for ensuring the functionality of all these major elements.

The Implication When A DST Failed

The Implication Of A Failed Check | Ttr Data Recovery

Users don’t often notice when the hard disk DST short test support is operating or when a Disk Self Test failed. The only time you’ll notice this is when a failed system error indicating a “short DST failed error” appears on your screen. This hard drive failure error message often befalls amidst particular codes, such as those with 0146, 0142, and 0141 hard disk short DST failure error.

All of these codes can only pertain to the fact that there is something amiss with one of your Hard disk’s major segments. Luckily, there is an expert hard drive data recovery service provider that can help you deal with this problem.

Top Symptoms To Recognize

Top Symptoms To Recognize | Ttr Data Recovery

You’ll know that you have encountered a hard disk short failed error message if you see something like this on your screen:

Error Code 0142.
Msg: Error Code 2000-0142.
Msg: Disc Drive 0 – self-test unsuccessful. Status: 79.

Sometimes, hard drive failure comes with a variety of reasons like logical failures or viruses. Both can be fatal to hard drives when not treated properly.

On the off chance that the above message prompts, your personal computer will start to malfunction through the following ways:

  • Your computer only keeps showing a blank screen
  • Your computer’s drive won’t boot
  • Your computer keeps restarting
  • When it does restart, the drive light flashes sporadically
  • Your computer just stops working

An erroneous hard disk short DST failure error can indicate that your Hard Disk Drive is nearing the end of its life. 

Fortunately, there is still a chance to fix your hard drive. 

As soon as you notice the above-mentioned symptoms, perform diagnostics to repair any hard drive hardware issues.

The worst-case scenario is that you may need to replace the hard disk drive.

5 Steps You Need To Do When Your Short DST Failed

Hard Drive Short Dst Check Failed What To Do | Ttr Data Recovery

It’s highly recommended to contact a hard drive tech expert to properly diagnose the Short DST check failure. But there are quick remedies you can execute if help is not readily available.

1. Check IDE or SATA cables

On the off chance that a hard disk short DST failed error note pops up on your workstation screen, immediately check your IDE or SATA cables first. These are the ones attaching your drive to your personal computer’s motherboard. If the cables are loose or have experienced some kind of degradation, it can seriously affect your PC’s performance.

On the off chance that you want your data to move easily from the drive and back to it, then you will need a set of reliable IDE and SATA cables.

2. Check and repair the bad sectors

Checking and repairing the bad sectors can be done by using a third-party partition manager.

Do this method by following the instructions provided. The software will provide you with the steps.

3. Scan and fix common disk drive DST fault errors

For this disk short dst failed error fixing method, you will need a Windows recovery CD. This step is performed in the Windows Repair Environment or command prompt. 

  • Boot Windows from the recovery drive
  • Open the Repair Windows screen by pressing “R”
  • Run Command Prompt as administrator
  • Type “chkdsk c:/p/r”
  • Hit Enter
  • Once done, type “exit” and your system will reboot

4. Restore your system to an earlier point

Keep in mind that these quick fixes are organized from basic to a more advanced way of troubleshooting a disk drive DST short test fault error. If the previous three methods did not work, it’s time to restore your system to an earlier point.

  • Open Control Panel
  • Choose System
  • Select System Protection
  • Choose System Restore. This can be found under System Properties
  • The wizard will show you the steps on how to select a restore point
  • Going to an earlier system state can fix your disk short DST check failed if it is caused by system issues

5. Swap your disk drive

Swap Your Disk Drive​ | Ttr Data Recovery

There are times when a system restore or restoring your recovery disk drive and system to an earlier point still does not fix the issue. If this happens, it’s time to replace your current disk drive and there are different types of hard drives to choose from! 

If you haven’t had any luck with the previous methods, this means that you have a hard disk DST short test error.

Frequently Asked Questions

How to save your data when a DST failed happens?

You will need to purchase a new hard drive for this. 

Here’s how you can backup your data from your recovery disk drive despite an error message in your DST check:

  • Proceed to temporarily connect your new hard drive via power and data cables. Your new disk drive will serve as a subsidiary drive on another computer.
  • Download the appropriate disk-cloning software. Here’s a good example. Users of a Seagate hard drive will need the SeaTool disk-cloning program.
  • Install and run the SeaTool disk-cloning program. A short DST should run smoothly later.
  • Keep in mind that at least one hard drive on this computer should be a Seagate disk. This will allow you to create a bootable copy of the SeaTool software.
  • Shutdown and disconnect your new Seagate disk drive from the other computer.
  • Connect your new Seagate hard disk drive to your PC.
  • Boot the SeaTool software from that bootable media.
  • The failed or failing hard drive should be selected as your source disk drive.
  • The new Seagate hard disk drive should be selected as your target disk drive.
  • Run your hard disk cloning software to check the DST short test failed error.
  • Shutdown and disconnect your old hard drive from the computer.
  • Properly install your new Seagate drive to your personal laptop.
  • Boot from it. Once done, 99.99% of your personal files and programs will be present.

How to solve A Short DST Error with HP laptop?

On the off chance that you encounter the below error message when you bootup your recovery disk drive, this could mean that your hard drive short Disk Self Test failed:

HP Laptop ENVY m6-1188ca Notebook PC
Hard Drive Short Check: DST FAILED
FAILURE ID: GU71BT-6AA892-XD7X1F-60RK03

To fix an HP laptop DST short test error, you’ll need to follow all of the quick fixes mentioned in this post. If all else fails, you can always renew your current HP Laptop hard drive with a new recovery disk drive. Then, order recovery disks for your specific HP laptop model and serial number.

Tommy Kh | Ttr Data Recovery

About the Author
Tommy Khamoushi, Data Recovery Expert

Tommy Khamoushi is an IACRB-certified Data Recovery Engineer and a Certified Forensic Computer Investigator. He has more than 20 years of experience in data recovery including providing technical support for the House of Representatives.

Tommy leads a team of data recovery engineers and experts at TTR Data Recovery to recover highly sensitive data for government agencies like the National Aeronautics and Space Administration (NASA) and enterprise businesses using advanced and proprietary techniques and processes.

Connect with Tommy on LinkedIn.